真空釬焊爐

設備用途及原理

 　 真空釬焊爐主要應用于航空部件、汽車部件、電子通信部件、家用電器、換熱器以及各種散熱器的鋁釬焊、銅釬焊、不銹鋼釬焊。

     由于在真空狀態下加熱可以去除工件表面油脂及氧化膜等，因而零件表面光亮度高，且無需釬劑，無需焊后清洗。

 真空釬焊爐分立式和臥式兩種。根據爐溫高低和客戶的工藝要求，采用石墨或鉬或鎢作發熱體及隔熱屏。發熱體可分成多區布置，各區獨立控溫，可編程PID調節。爐膛可整體移出，便于維護。配備充氣裝置、可向爐內充入保護性氣體或工作氣體，充氣流量可調。配備內循環冷卻裝置，可加速爐內物料冷卻，縮短工作周期，利于提高產品質量和工作效率。

Applicaiton and Principles

 Vacuum brazing furnace is principally adopted in aerospace devices, vehicle components, electronic communicating devices, home appliances, heat exchanger and Al brazing, Cu brazing and stainless-steel brazing of various heat radiators.

 It can remove the grease and oxidized membrane over the work piece with being heated under vacuum, and thus these work pieces have high brightness over their surface, and no need for brazing flux and cleaning after brazing.

 Vacuum brazing furnace has two types, vertical type and horizontal type. Based on the furnace temperature and process requirements from clients, it is adopted with graphite or molybdenum or tungsten as heating elements and heat insulating screen. Heating elements can be distributed among multiple districts, and each district can control temperature independently, and programmable PID regulation. Furnace hearth can be entirely removed out, convenient for maintenance. It is equipped with gas filling device, filling furnace with shielding gas or working gas, and its flow can be regulated.

  This furnace is equipped with internal-circulation cooling device, accelerating the speed of cooling down materials in furnace, shortening working period, and beneficial for improving product quality and performing efficiency.

設備主要技術參數Principle Technical Parameters

以下是設備產品技術參數，部分數據會隨著產品創新改進，最新數據請聯系我們:

Product technical parameters of equipment are presented as below, and partial of these data will be updated as the product innovation, please contact us if any latest data:

以上為標準配置，可根據客戶要求進行調整。

It is standard configuration above, and can be adjusted according to the demand from customers.